Playing with “Sharing,” a function to share Joy-Cons between two users.





Remove Joy-Cons from your Nintendo Switch.
Open “Controller” in the HOME menu, and press both SL and SR buttons on the Joy-Con.
This will register the Joy-Con as “horizontally held,” and you will be able to operate just with one Joy-Con.
By registering both the left and the right Joy-Cons, two users can play with just one set of Joy-Cons.

The “Controller” setting can also be accessed from the “System” menu on your KORG Gadget.


Operations normally allocated to the ZL/ZR buttons can be accessed with SL/SR buttons during Sharing.

The following functions are operated differently during Sharing.
In both, you can adjust the values using the up and down cursor buttons while pressing the A button.

  • Parameter operations of the gadget and the mixer
  • Velocity operations on the piano roll screen
  • Automation operations on the piano roll screen

The following functions cannot be used during Sharing.

  • Shortcut function of the L button
  • Adjustment of note length on the the piano roll screen (selecting a portion will allow you to adjust the length)
  • Parameter operations of the gadget and the mixer using motion
  • Motion performance, controller performance


Was this article helpful?
0 out of 1 found this helpful


Article is closed for comments.