How to use Keystage with FL Studio

1. Update FL Studio to the latest version.
2. Connect Keystage to computer and start FL Studio.
3. Click on "OPTIONS -> MIDI Settings" in the FL Studio menu.
4. Select the Input port "Keystage x KBD/CTRL" (Windows, where x is a number) or "Keystage KBD/CTRL" (mac) and set as follows:
   
   • Turn on the Enable button (green)
   • Controller type: generic controller
   • Port: Any number (not used by other devices)
5. Select the Input port "Keystage x DAW IN" (Windows, where x is a number) or "Keystage DAW IN" (mac) and set as follows:
   
   • Turn on the Enable button (green)
   • Controller type: KORG Keystage DAW
   • Port: Any number (not used by other devices and different from the number set in step 4.)
6. Select the Output port "Keystage x CTRL" (Windows, where x is a number) or "Keystage CTRL" (mac) and set as follows:
   
   • Send master sync: ON (green) if you want the Keystage arpeggiator to sync with the FL Studio tempo.
   • Port: The number set in step 4.
7. Select the Output port "Keystage x DAW OUT" (Windows, where x is a number) or "Keystage DAW OUT" and set as follows
   
   • Port: The number set in step 5.

The following functions are assigned to Keystage controllers.