| DISTORTION |
| PHASER |
| CHORUS/FLANGER/ENSEMBLE |
| EQ |
| DELAY |
| REVERB |
| MASTER |
DISTORTION
This is a distortion effect that lets you choose from three types of distortion.
ON/OFF
To use this effect, turn this ON.
TYPE
Selects the effect type.
DRIVE
Adjusts the amount of distortion by adjusting the input level of the distortion circuit.
TONE
Adjusts the tone.
MIX
Adjusts the balance between the effect sound and direct sound.
PHASER
This effect modulates the sound by combining the original sound with a sound whose phase changes periodically.
ON/OFF
To use this effect, turn this ON.
MANUAL
Adjusts the frequency at which the effect is applied.
DEPTH
Adjusts the depth of the effect.
FREQ
Adjusts the speed of modulation.
RESONANCE
Adjusts the amount of resonance.
CHORUS/FLANGER/ENSEMBLE
This effect gives the sound spaciousness and a sense of vibrato by combining the original sound with a signal whose pitch is modulated.
ON/OFF
To use this effect, turn this ON.
TYPE
Selects the effect type.
DEPTH
Adjusts the depth of the effect.
FREQ
Adjusts the speed of modulation.
MIX
Adjusts the balance between the effect sound and direct sound.
EQ
This boosts or cuts the levels of the low, mid, and high-frequency region.
ON/OFF
To use this effect, turn this ON.
LO GAIN
Adjusts the low-frequency region.
MID FREQ
Specifies the frequency of the mid-frequency region.
MID GAIN
Adjusts the mid-frequency region.
HI GAIN
Adjusts the high-frequency region.
DELAY
This effect delays the sound in time.
ON/OFF
To use this effect, turn this ON.
TEMPO SYNC
Turn this on/off to specify whether the delay time is synchronized to tempo.
FEED BACK
Adjusts the amount of feedback.
TIME LEFT
Adjusts the delay time of the left channel.
TIME RIGHT
Adjusts the delay time of the right channel.
LEVEL
Adjusts the level of the effect sound.
REVERB
This effect simulates reverberation and acoustic space.
ON/OFF
To use this effect, turn this ON.
TYPE
Selects the effect type.
TIME
Adjusts the reverb time.
TONE
Adjusts the brightness of the reverb sound.
MIX
Adjusts the balance between the effect sound and direct sound.
MASTER
This is the master volume slider, use this to set the output level.
LEVEL
Adjusts the output level.
Comments
Article is closed for comments.